Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for Williamsbridge Homeowners
Sealed ducts mean air arrives where you’re paying for it to arrive. In Williamsbridge, most homes run older galvanized trunk lines with flex runs branching off to the registers, and those joints loosen over the years, so a system that heats well in the front rooms can feel weak in the back bedrooms. The fix is mechanical, not mysterious: find the leaks, repair the damage, and seal it tight.
Our technicians have up to 13 years of experience on residential duct systems, including the low-clearance basements common to this part of the northeast Bronx. We connect you with a licensed local professional who uses professional-grade equipment from Rotobrush and Abatement Technologies, works from a written estimate, and shows before-and-after photos of your own ducts. Same-day arrival is often possible when you call early.
Call (844) 443-3861. We answer 24/7, and we dispatch from 7am to 7pm, Sunday through Friday.
What Our Duct Repair & Sealing Service Includes
Six distinct jobs fall under this service. Which ones your system needs depends on what we find once we’re in the crawlspace or above the ceiling, and each is priced before any work begins.
Duct Sealing
Duct sealing closes the gaps that let conditioned air bleed into unconditioned space before it ever reaches a register. You need it when rooms closest to the furnace feel fine but the far end of the house stays stiff, a pattern that points to leakage along the run rather than a failing system. We smoke-test suspect joints, then seal them with a combination of mastic and pressure-sensitive tape rated for ductwork, never standard cloth-backed tape that dries out and lets go within a season.

Flex Duct Repair
Flexible duct is the corrugated silver run you’ll usually see in attics and tight chases, and it’s the most common source of a hidden leak. The outer jacket tears, the inner liner collapses on a sharp turn, or a run gets kinked during another trade’s work, and airflow drops accordingly. We repair or replace the damaged section, re-stretch the run so it’s tight rather than sagging, and support it correctly so it doesn’t rest on the ceiling below.

Metal Duct Repair
Sheet-metal duct develops leaks at seams, at the boots where it meets the floor or wall, and along taped joints that have dried out over decades. You’ll notice it as a whistle from the basement or a room that never quite warms up. We straighten and re-hang damaged trunk sections, reseal the longitudinal seams, and repair crushed or separated joints rather than taping over them. Where a section is beyond patching, we replace it with matching gauge.

Duct Insulation
Insulation matters most on runs that pass through unconditioned zones like the attic or crawlspace, where the surrounding air is far from room temperature. A bare or under-insulated duct loses heat on the way to the register, so you pay to heat the attic instead of the bedroom. We wrap those runs to stop the transfer, and we repair jacket tears because a wet or exposed jacket defeats the point of the insulation underneath.
Mastic Sealant
Mastic is the brushable sealant code-minded installers use on duct joints, and it lasts far longer than tape. If a previous job was done with cloth duct tape, the seals are likely already failing, and a re-seal with mastic is usually the more durable answer. We clean the joint, apply mastic to the seam and boot, and let it cure to a permanent bond. Where a joint is only accessible from one side, we work with the tools we can get in rather than cutting open a ceiling unnecessarily.
Air Leak Repair
Air leaks differ from simple joint gaps – they’re larger openings, disconnected sections, or boots that have pulled completely free of the floor or wall. They show up as a strong draft in an unexpected place, a room that never gets air at all, or a basement that smells like furnace air. We trace the leak with a smoke test and pressure readings, reattach any disconnected section, then seal and support it so the repair holds.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Duct Repair & Sealing
We work with Rotobrush equipment for the cleaning and inspection side of the job, and that same platform lets us look inside a duct run before we start sealing it. Knowing the condition of the interior matters, because you don’t want to seal a system that’s still carrying dust and debris. Rotobrush systems are built for restoration-level work, which is the standard we hold to on residential jobs.
The sealant and finishing side of the job uses Abatement Technologies equipment and Guardsman-grade protective products, so the repair is followed by a clean, protected air pathway rather than a bare patched joint. Whether your system has a Honeywell or Aprilaire filter setup feeding into it, or any other make entirely, we can help. We don’t sell equipment; we make the ductwork behave the way the manufacturer intended.
Signs You Need Duct Repair & Sealing Right Now
- Rooms that never reach temperature. If the far bedroom stays cool while the living room is toasty, the air is leaking out of the run before it gets there. Left alone, you’re paying to heat or cool your crawlspace, and the imbalance gets worse as joints loosen.
- Whistling, hissing, or rattling from the ducts. A whistle at a boot or a rattle at a seam usually means air is escaping through a gap. It’s a straightforward fix once we find it, and it’s a good sign that a leak is discoverable rather than buried.
- Dust or debris blowing out of the registers. Sealed ducts shouldn’t deliver visible dust. When they do, the leak is pulling it in from the crawlspace or attic, and sealing stops that pathway at the source.
- A visible tear, kink, or disconnect. Flex duct jacket tears, crushed sections, and boots pulled away from the floor are visible findings that should be repaired before they worsen. If you’ve spotted one during another project, that’s a good reason to have the whole system checked while we’re there.
- Rising energy bills with no other explanation. A leaky system runs longer to hit the setpoint, so bills creep up while comfort goes down. If your usage has climbed and nothing about your habits changed, a duct inspection is a sensible next step.
Our Duct Repair & Sealing Process – Step by Step
- 1
We listen to the complaint. When you call, we ask which rooms are weak, whether the basement smells like furnace air, and when you first noticed it. That conversation sets the focus for the inspection.
- 2
We inspect with a smoke test and pressure readings. A small smoke stick at suspect joints shows us exactly where air escapes, and static-pressure readings tell us whether the problem is leakage, restriction, or both. You see what we see.
- 3
We show you the damage and provide a written estimate. Every repair and seal is itemized before any work begins, with one flat price agreed in advance. There’s no per-vent pricing and no surprises added later.
- 4
We repair, seal, and insulate as needed. Metal and flex sections are fixed or replaced, joints get mastic or tape rated for ductwork, and unconditioned runs get insulation where it’s needed. Any disconnects are reattached and supported so they hold.
- 5
We re-test and document. Post-repair pressure readings confirm the leaks are closed, and we take before-and-after photos of your own ducts for the record. You get a clear picture of what changed.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Williamsbridge?
A typical duct repair and sealing job on a Williamsbridge home runs from $350 to $1,200 for the repair work, depending on how many leaks we’re sealing and whether a run needs replacement. Sealing alone on an accessible system often lands in the lower half of that range. A single flex duct replacement is usually the smallest job. Whole-home re-sealing with insulation on attic or crawlspace runs sits in the upper range. These are typical estimates; your written estimate sets the final price.
What moves the number is access as much as damage. A joint you can reach easily costs less to seal than one that requires opening a ceiling. The number of runs, whether we’re repairing metal or flex, and how much insulation has to be replaced all factor in. To avoid overpaying, insist on a written, itemized estimate before work starts, and ask whether the price includes re-testing after the repair.
Our estimate is free. You’ll get the scope, the cost, and a clear explanation of what each item does, so you can put the quote and any competing quote side by side with confidence. A single flat price per system agreed in advance is the standard we hold ourselves to, and it’s the reason we skip per-vent pricing entirely.
Duct Repair & Sealing Near Williamsbridge – Our Service Area
We serve homeowners and property managers across the northeast Bronx and into Westchester, including Ardsley, Eastchester, Larchmont, Hastings-on-Hudson, Scarsdale, Dobbs Ferry, Mamaroneck, and Baychester. Response times depend on where you are, and calling early in the day usually means arriving the same day. For a closer look at the full duct pathway, see our air duct cleaning Williamsbridge service. We also handle duct repair & sealing for homeowners in Ardsley and duct repair & sealing in Eastchester.
Serving Williamsbridge, NY – Our Local Coverage Area
We serve Williamsbridge and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Duct Repair & Sealing in Williamsbridge
Duct repair and sealing is the work of closing holes, gaps, and loose joints in your duct system so conditioned air reaches the rooms instead of leaking into the attic, crawlspace, or basement. It covers fixing damaged flex and metal sections, replacing crushed runs, applying mastic sealant to joints, and insulating runs that pass through unconditioned space. Unlike a cleaning, which removes dust, sealing is about stopping the leak itself. The two often go together, and a typical visit starts with an inspection so you know which applies to your home.
A single-run repair or a partial seal usually takes a couple of hours once we’re on site. A whole-home re-seal with insulation and a flex replacement can be a full-day job. The inspection at the start tells us the scope, and we tell you how long it will take before the work begins. You’re never left guessing about when we’ll finish.
Most jobs run between $350 and $1,200, with the lower end covering a small repair or partial seal and the upper end covering whole-home re-sealing plus insulation. A single flex duct replacement is usually the simplest job, while accessible crawlspace runs cost less than runs that require opening a ceiling. The written estimate sets the final price, and there’s no per-vent pricing. Call (844) 443-3861 for an exact quote – estimates are free.
Yes. We use Rotobrush equipment for the inspection and cleaning side of duct work, which lets us see inside a run before sealing it. We use Abatement Technologies equipment for the sanitizing and finishing steps, and Guardsman-grade protective products for the finishing pass. Whether your system is older metal or newer flex, we can help.
Same-day arrival is often possible when you call early. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed on Saturday.
The local professional we connect you with stands behind the work, and we’ll explain the coverage in writing before the job starts. If a seal fails or a repair doesn’t hold, we make it right. Ask about the specific terms at the estimate, and we’ll put them in writing so you know exactly what’s covered and for how long.
Clear access to the registers, the furnace, and the attic or crawlspace hatch is the main thing, since that’s where the work happens. Move breakables away from the work area, and keep pets in another room while technicians are moving equipment. If you know which rooms are coldest or weakest, tell us at the start; it speeds up the inspection. We handle the rest, including job-site cleanup.
Schedule Your Duct Repair & Sealing Service in Williamsbridge Today
Sealing your ducts stops the quiet loss of air you’re already paying for. Call (844) 443-3861 to book a free, no-obligation estimate in Williamsbridge. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get one flat price per system agreed before work begins, plus before-and-after photos of your own ducts.
Written by the team at Air Duct Cleaning Williamsbridge.